Industrial brush

• 
  Wheel brush

  This tool removes burrs from machine-processed work surfaces and rust, dirt, or foreign objects that occur on the work surface by the impact force (hammer effect) at the moment when countless brush wires/fiaments contact to the product.

• 
  Cup Brush

  By rotating the brush at high speed, the wires/fiaments spread widely, brushing processing would be treated well even in deep areas. The outer diameter of brush would increase by high-speed rotation,improving work efficiency.

• 
  Bevel Brush

  The outer metal parts are designed as a flat dish shape, and during rotation, the wires/filaments would spread to the same shape as when stationary, ensuring excellent workability.

• 
  Wheel brush with shank / Cup Brush with shank

  This tool is powerful for inner pipe polishing and deburring.
  It is lightweight and ideal as a tool for robots or automatic machines.
  In the case of a cup shape, the bristles/filaments spread wider than the outer metal parts, making brushing process treated at every corners.

• 
  End Brush

  Additional process like bundling, resin coating, or stepping could be added according to the treatment purpose.
  Brushes could be custom-made to fit robot or NC or specialized machine.

• 
  Wonder-lap series

  By utilizing the expansion and contraction action of the brush tip, it can remove burrs from different diameter holes with a single brush. The brush uses diamond electroplating to achieve high abrasive ability.
  It is ideal for processing at inner stepping hole or intersecting holes.

• 
  Mini brush

  Because its small outer diameter, this brush could reach into narrow space and excels in workability. It follows uneven surfaces and curved surfaces well, offering excellent adaptability.

• 
  Techno-star series

  First environmental brush made without any metal in the world Offer 30% higher wires/filaments density compared to traditional methods Exceptionally lightweight brush No brushing missing lines

• 
  Dot Brush

  Only the worn wires/filaments need to be replaced, significantly reducing running costs. The planting plate could be recycled multiple times (P-type could not be recycled).

• 
  Spiral brush

  Offering excellent conformability to follow uneven surfaces uniformly, making it ideal for cleaning inside threaded holes or pipe inner surfaces.
  The core wire axis could be extended, in order to remove burr or cleaning even at deep locations.

• 
  Kensaku Maru

  Abrasive balls attached at the tip of the brush,it is an ideal tool for removing burrs in cylindrical areas and Internal diameter polish finishing,etc.

• 
  BRH Series

  These are highly grinding wires made by twisting multiple strands of zinc-plated hard steel wire. Each individual wire is φ0.3 diameter, so the scrataches after brushing process would be finer comparatively.

• 
  Channel brush

  Bending wires/filaments around a core wire and then fix them with C-shaped metal parts.
  The method of wrap-fixing to shafts, drums, etc., results in a lightweight brush.

• 
  Implant brush

  Implanting the wires/filaments into small holes perforated on plywood, aluminum, PVC plates, or synthetic resins etc.
  The wires/filaments could be planted at a custom pitch.
  There are two methods：machine implant and hand implant.

• 
  Brush Roll (Brushes for Steel & Paper Industry)

  This mothod involves inseting the wires/filemants into the perforated disk planting plate, then bend and fix them.
  This minimizes wires/filaments breakage and fall off, allowing for stable and long-term use. The root of the wires/filaments is tightly bound with rigid binding stainless wire in a double-loop structure, preventing wires/filaments fall off.

• 
  Special brush

Brush for care

• 
  Oral care brush

  Keep mouth fresh and clean! Also refresh your mind!

Others

• 
  Machine

  Our original deburring machines, created by brush experts, full of know-how!

Product Catalogue